CAN2Ethernet Gateway CAN2Ethernet-CAN Bridge
友情提示:(1)有问题: 可以点击 右边中-在线咨询，左侧qq，旺旺在线联系
         (2)感兴趣: 可以点击 左侧中-分享到

 

 

CAN@net II/Generic - CAN/Ethernet Gateway

CAN-Ethernet Gateway and
CAN-Ethernet-CAN Bridge


WEEE and RoHS conformCAN-Ethernet Gateway
In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TC
@净II /通用 - CAN以太网网关或CAN / CAN桥
P/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. As CAN-Ethernet Gateway, the CAN@net II/Generic offers simple, flexible access to CAN systems via a LAN or via the Internet.

CAN网关配置 - 概述

CAN-Ethernet-CAN Bridge
Using two CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge allows the exchange of CAN messages between two CAN systems via TCP/IP where filter tables can be defined.


CAN网桥配置 - 概述

Configuration and firmware update
The configuration of the TCP/IP parameters can be performed using a PC tool with automatic device detection. The configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.

Technical Data

PC bus interface 10/100 Mbit/s Ethernet (10Base-T/100Base-T), Autodetect, RJ45 connector
IP address allocation DHCP, via PC tool
Microcontroller Freescale MCF5235, 150 MHz
Memory extension 8 Mbyte DRAM, 4 Mbyte Flash
CAN controller SJA1000
CAN bus interface ISO 11898-2, Sub D9 galvanically decoupled (500V)
Current supply 9-32 V DC, 3 W
Temperature range -20 ºC ... +70 ºC
Certification CE, FCC, CSA
Housing Plastic housing for top hat rail mounting
Size approx. 22,5 x 100 x 115 mm