STANDARD FEATURES

No protuding floating ball, full bore

Soft-seat seal TFM 1600

Standard for connecting flanges: EN 1092-1; ASME B16.5

Operating temperature see temperature pressure diagram

Pressure Class: PN16-40; ANSI 150-300

Intercepted fluid: air, water, gas, petroleum and petrochemical products.

Antistatic device EN12662-2

Stem seal: TFM 1600 V-pack

Additional seal on stem with FKM O-ring

Anti Blow-out stem

Actuator connection as per standard ISO 5211

Closing angle >7°

Superficial treatment: blueing

SPECIAL FEATURES ON REQUEST

LF2 carbon steel for low temperature execution (-40 C°)

For other flange types please contact our sales department

Heating jacket

Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced  with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department

Cavity filled seat in PTFE

Mono-directional version with pressure-relief hole in the ball

Stainless steel lever . For special versions in materials different from the standard (body, ball, stem), please contact our sales department.

Stainless steel Stem nuts and springs

Superficial treatment: white zinc coating,epoxy coating (for other coating please contact our sales department)

CERTIFICATIONS

In compliance with European Directive 97/23 EC PED; Fugitive Emission UNI EN ISO 15848; TA-LUFT VDI 2440; FIRE SAFE: UNI ISO 10497 - API6FA;

In compliance with ATEX 94/9/CE Directive (on request)

ENGINEERING STANDARDS

Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN 12516.

Materials and rating in compliance with ASME B16.34 for ANSI valves and EN 12516 for PN valves