|
|||
EtherRT-汽车整体-实时仿真测试系统
型号: PXF3506
The modular concept of the IXXAT automotive products enables an easy adjustment to your individual requirements – both in terms of functionality and costs.
Embedded Platform + ACT = versatile solutions
|
The Embedded Platform forms the basis for manifold testing and analysis applications – both, with the IXXAT ACT tools as well as with customer-specific software solutions. At this, the platform offers a wide range of interfaces, e.g. for CAN, FlexRay, LIN, EtherCAT.
Embedded Platform
Host for your access to the automotive bus systems
- Powerful processor and a real-time operating system
- Variety of different automotive communication interfaces
- Stand-alone and PC-based operation
-
Basis for IXXAT ACT and customer-specific software
solutions based on the development tool - Various interfaces for CAN, LIN, FlexRay, EtherCAT...
Product Types
|
|
|
|
|
|
Functions and interfaces |
FRC-EP 170 | FRC-Mobile | FRC-EP 190 |
| FlexRay A/B channel |
1 x |
1 x |
2 x (max.) |
| CAN High Speed |
6 x (max.) |
4 x (max.) |
8 x (max.) |
| CAN Low Speed |
1 x (max.) |
1 x (max.) |
2 x (max.) |
| CAN FD |
2 x (max.) |
|
4 x (max.) |
| LIN |
1 x |
1 x |
2 x |
| K-Line |
1 x |
|
2 x |
| RS232 |
1 x |
1 x |
1 x |
| USB |
2 x (Host and Device) |
2 x (Host and Device) |
2 x (Host and Device) |
| Digital in |
4 x |
4 x |
4 x (max.) |
| Digital out |
4 x |
4 x |
4 x (max.) |
| Analog in (12 bit) |
|
|
4 x (max.) |
| Further interfaces |
|
|
optional EtherCAT-Slave I/O |
| SDHC card slot |
1 x |
|
1 x |
| Internal memory |
|
32 GB |
|
| Internal expansion slots |
2 x mPCIe form factor |
2 x mPCIe form factor |
2 x (FlexRay, CAN, CAN-FD, EtherCAT) |
| External extensions |
Wi-Fi, USB devices |
Wi-Fi |
Wi-Fi, USB devices |
| Others extensions |
Prepared: GSM/GPS, Bluetooth and Automotive Ethernet |
Prepared: GSM/GPS, Bluetooth and Automotive Ethernet |
Prepared: GSM/GPS, Bluetooth and Automotive Ethernet |
| PC connection |
Ethernet / USB 2.0 / WLAN |
Ethernet / USB 2.0 / WLAN |
Ethernet / USB 2.0 / WLAN |
| Protection class | IP42 |
IP67 |
IP42 |
Use cases
Test bench
Parts of a vehicle are frequently tested isolated from the vehicle. At this, the communication interface should be installed close to the tested device, to minimize the interference in the bus topology.In order to become operational, most electronic control units, ECUs, also require a simulation of the remaining vehicle bus. The embedded platforms offer both: a communication interface as well as a residual bus-simulation in one device.
Functional simulation
Electronic control units are sometimes required to respond to certain events in real time. A response of the PC is often too slow or not securely chronologically defined. In these cases, functional simulations on the intelligently embedded platforms can be used, which self-sufficiently and very promptly indicate a response and then forward this to the PC – time-uncritically.
Analysis
The platforms can also be used for bus communication analysis. A simple use case is the pure interface function with a corresponding analysis software on the PC, but the strength of the intelligent devices is the pre-processing of data. Thanks to efficient pre-processing of data, it is possible to send only selected, physical signals from different bus systems to the PC for evaluation. Results can then be transmitted across long distances to the PC by using Ethernet for the connection.
Development platform
HMS offers suitable tools for many use cases. Nevertheless, specific use cases may require precise customized solutions. The open architecture of the platforms allows to quickly provide adaptations and extensions of IXXAT solutions as well as fully customized solutions. On the basis of the software development kits, this also can be perfor
License and Bundle Model for the FRC-EP series and the ACT tool:
url： http://www.51lm.cn/p/templates/cn/show.php?cid=0&aid=3506
