Memorator R SemiPro

 

 

Kvaser Memorator R SemiPro is a small, yet advanced portable CAN data logger. The device can be configured in many different ways to achieve the most suitable and effective logging for any occasion. Connecting the logger to a PC provides direct access for configuring baud rates, trigger conditions and filters using the standalone Kvaser Memorator Tools. To get a rugged design the SD-disk is located inside the unit and soldered to the PCB to make sure it works error free even when exposed to vibration and shocks.

Kvaser Memorator R SemiPro can also be used as a powerful two channel real time CAN to USB interface - two products in one!

Major features of Kvaser Memorator

• One device for desktop and laptop.
• Functionality of a standalone CAN bus data logger and a USB CAN bus interface in a single device.
• Support for Kvaser Linx J1587.
• Quick and easy plug-and-play installation.
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.
• CAN messages are time-stamped with 2 microseconds resolution.
• Large on-board RAM buffer for CAN messages.
• 100% compatible with applications written for Kvaser Leaf, LAPcan, PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib.
• 电气隔离to protect the hardware.
• Power from CAN bus or from the USB side.
• Built-in real time (calendar) clock with battery backup.
• Logger status is indicated with five externally visible LEDs.
• IP67 rated lightweight aluminium housing

Property	Value
The information herein is subject to 改变 without notice.
Galvanic Isolation	Yes
Bitrate	20-1000 kbit/s
Silent mode	Yes
Error frame generation	Yes
Error frame detection	Yes
Weight	190 g
Timestamp resolution	2
On board buffer	Yes
Maximum message rate, send	20000
Maximum message rate, receive	20000
Sound	No
Clock synchronization	MagiSync
Dimensions (WxLxH)	30x200x20 mm (1.2x7.9x0.8in.)

url： http://www.51lm.cn/p/templates/cn/show.php?cid=0&aid=531