|
虚拟CAN接口的最新驱动(VCI) 驱动适用于for 32 and 64 bit Windows 7 operating systems.
最新的JAVA-API and the support for the VCI V2 as layer on the VCI V3. This support is available by using the VCI V3.4.x or newer in combination with the VCI V2.20.x. Please see also the installation notes below.
The VCI V3 (Virtual CAN Interface) 可以用于开发基于IXXAT的工具。of customer specific applications and to run the IXXAT tools. For the development of customer specific applications a .Net, a C-API and a JAVA-API is provided. Furthermore the integration into LabView is supported.
支持的板卡类型：
Currently the VCI CAN driver for Windows supports the following IXXAT interfaces:
- PC-I 04/PCI
- iPC-I 320/PCI II
- iPC-I 165/PCI
- iPC-I XC16/PCI
- iPC-I XC16/PMC
- iPC-I XC16/PCIe
- tinCAN 161
- USB-to-CAN compact
- USB-to-CAN II
- CAN-IB100/PCIe
- CAN-IB200/PCIe
- CAN-IB120/PCIe Mini
- CAN@net II/VCI
- CANblue II
- CAN-IB130/PCIe 104
- CAN-IB230/PCIe 104
- FR-IB100/PCIe (only in combination with VCI V2.20)
注意:
- The current version of the driver does not support the ISA interfaces
- The canAnalyser version 2.5 or newer can be used in combination with the VCI V3.5.0
- The VCI V3 and the VCI V2 programming interface do differ. If you are using third party tools, e.g. OEM software, which was developed based on the VCI 2.x driver, please check in advance whether the software supports the VCI 3.x driver or not.
- If you require VCI V2 support, please uninstall the old VCI V2 and VCI V3 and reboot the PC before installing the latest VCI V3. After rebooting the PC one more time, install the VCI V2.20 or later. The VCI V2 will then also provide support for the PCI and USB interfaces supported by VCI V3.
|
