PXF2494-LonWorks - EtherCAT从站

Shanghai Passiontech Tech, 021-51870017, sales@51Lm.cn

     
     
     

LonWorks - EtherCAT从站


型号: PXF2494


简介:LonWorks - EtherCAT Slave The Anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.The LonWorks interfac...
品牌 HMS HMS
产地瑞典
型号PXF2494
折扣其他电询

 

 LonWorks - EtherCAT Slave


The Anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.

The LonWorks interface is a high performance interface to LonWorks networks. The interface supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the "LWtool" PC-based configuration utility program, link, and convert data between the 其他 network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVTs or UNVTs.

The EtherCAT Slave Interface for the Anybus X-gateway implements CANopen over EtherCAT, and ex改变s up to 512 bytes of data in each direction. The interface acts as a slave node, which means it can be accessed by an EtherCAT master, but it will not initiate communication by itself.
The module has two RJ45 连接器 using 100 Mbit full duplex Ethernet. For configuration a XML-format device despription file is supplied by HMS.

 

   KEY FEATURES
 
  Certification prepared for Lonmark application layer interoperability guidelines V3.2
  LonWorks FT-X1 Transceiver
  EtherCAT interface supports CANopen objects SDOs and PDOs
  Up to 512 bytes of cyclic data in each direction (PDO)
  Up to 512 bytes of acyclic data in each direction (SDO)
  EtherCAT interface is DS301 v4.02 compliant
  Includes special LW Config Software Tool for Network variable Setup

 

  TECHNICAL SPECIFICATIONS
Size:   126 mm x 110 mm x 42 mm
Power Supply:   24 VDC (±10%)
温度:   0-65°C
Current Consump:   max 300 mA
I/O Input:   Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
I/O Output:   Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
Mech Rating:   IP20/Nema1
Config Method:   Windows Hyper Terminal
UL certification:   E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification:   ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply 连接:   -pole 5.08 mm Phoenix pluggable screw 连接or
LonWorks baudrate:   78 kbit/s
LonWorks Connector:   5-pole 5.08 mm Phoenix pluggable screw 连接or
EtherCAT baudrate:   100 Mbit/s
EtherCAT 连接or:   RJ45
EtherCAT config:   Configured by EtherCAT Master via XML file (provided by HMS)
LonWorks Config:   LW Tool ABX for LonWorks interface variable configuration (included).
Price Group:   C
订货号:   AB7695


url: http://www.51lm.cn/p/templates/cn/show.php?cid=0&aid=2494

 

电话400-878-1895, 传真:021-51561359 邮箱:sales@51LM.cn
sales@51LM.cn 上海徐汇区斜土路2601号嘉汇广场T1-11B