简介：光纤转换器FO转换器用于将CAN的（ISO 11898-2）电缆型号转换成光纤信号。The FO 中继器is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables.其提供了完整的隔离和一级EM过滤。This provides acomplete 隔离and 保护against EM-influences. 其特殊的接口One special feature of the 中继器is that itseparates a defect...
Sending (2 green LEDs), defective segment (2 red LEDs)
CAN bus interface
ISO 11898-2. Screw terminals. CAN termination resistors are integrated (switchable).
FOC 连接ion光纤连接
2 x ST terminals for duplex line (Glass 50/125 µm duplex)
Baudrate波特率
Up to 888 kbps
Delay
延迟
小于300ns在60m的光纤之间通信和转换下。
~300 ns (translates into ~60 m (~90 ft.) bus length) between the wire 连接ion of a FO 中继器through the fiber optic cable to the wire 连接ion of a second FO 中继器(not including the signal delay time of the fiber optics, which is ~5 ns/m)
Power supply
供电
9-35 V DC, 3 W typ., through terminals
Galvanic isolation
隔离
1 kV, 1 sec.; CAN 1
Certification认证
CE
温度 range
温度范围
-20 ºC to +60 ºC
Housing, size
Plastic enclosure, 110 x 75 x 22 mm (without FO 连接or)
Contents of delivery - FO-Repeater, Quick reference
Order number
1.01.0063.01020
CAN Fiber Optic 中继器- Glass fiber version with ST 连接or
收藏灵猫网
12522120
12522120
+86-14782588945
FO转换器用于将CAN的（ISO 11898-2）电缆型号转换成光纤信号。The FO 中继器is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables.
