|
|
|
|
Kvaser LAPcan |
|
|
简介：The Kvaser LAPcan 产品描述：EAN Number: 73-30130-00029-2The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are... |
|
Brand
|
|
|
| Made In |
|
| Modle |
PXF1043
|
| Disctount |
|
|
| PassionTech Ord |
OrderNum |
Product Name |
Price RMB |
Brand |
|
|
|
The Kvaser LAPcan
产品描述：
| Property |
Value |
| The information herein is subject to change without notice. |
| Galvanic Isolation |
No |
| Bitrate |
5-1000 kbit/s |
| Silent mode |
Yes |
| Error frame generation |
Yes |
| Error frame detection |
Yes |
| Weight |
50 g |
| Timestamp resolution |
8 |
| On board buffer |
Yes |
| Maximum message rate, send |
0 |
| Maximum message rate, receive |
0 |
| Sound |
No |
| Clock synchronization |
N/A |
| Dimensions (WxLxH) |
85x54x5 mm (3.3x2.1x0.2in.) |
 Kvaser Drivers for Windows
kvaser_drivers_setup.exe (Version V4.9.0)
Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
Release Notes
 Kvaser DIADEM driver
kvaserdiadem.zip (Version 1.0.0)
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.3.889)
A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work.
Release Notes
XTM, Free LIN Viewer
xtmlin.zip (Version V3.8sr5)
A free of charge LIN bus viewer. Works with Kvaser Leaf Professional LIN, and/or Kvaser LAPcan + DRVLIN.
cleanup.exe
cleanup.EXE (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Remove old drivers
cleanup_vector.exe (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
Kvaser CANlib SDK
canlib.exe (Version V4.9)
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to downl
Release Notes
cleanup.exe
cleanup.EXE (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Kvaser CANKing
kvaser_canking_setup.exe (Version V5.3.889)
A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work.
Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
|
|
|
|
|
400-878-1895
Kvaser LAPcan / LAPcan II Users Guide 
