|
|
|
|
USB-10 LVDT Conditioner Unit |
|
|
简介：USB-10 LVDT Conditioner UnitThe model USB-10 is an LVDT signal conditioner that provides analog and digital outputs, multiple 5V pulses (set points for pulse start and pulse stop) of adjustable position and length, and LCD display. It can communicate with other digital devices using both USB and RS-232 interfaces.With USB interface there is no need for an external power supply, and the maximum len... |
|
Brand
|
|
|
| Made In |
|
| Modle |
PXF1079
|
| Disctount |
|
|
| PassionTech Ord |
OrderNum |
Product Name |
Price RMB |
Brand |
|
| PXO_4177 | USB-10 | USB 232控制器 信号调理无采集 | 10239 | ~ | 11316 | singer |  |  |
|
|
USB-10 LVDT Conditioner Unit
The model USB-10 is an LVDT signal conditioner that provides analog and digital outputs, multiple 5V pulses (set points for pulse start and pulse stop) of adjustable position and length, and LCD display. It can communicate with other digital devices using both USB and RS-232 interfaces.
With USB interface there is no need for an external power supply, and the maximum length of the interface cable is 2 meter. For RS-232 an unregulated 9VDC adapter is required, and the cable length can be up to 20 meters. The display has a +/-999,999 counts resolution, with adjustable zero and scale.
Features
- 21 bit resolution.
- Software selectable scale and zero adjustment.
- Software selectable digital filtering and conversion rate.
- Optional system linearization function by supplier.
- Single line, 16 alphanumeric characters LCD display.
- Programmable 2 points digital set points.
- Additional RS 232 data communication channel.
- Supporting six, five and four wire LVDTs.
- Additional analog output.
- No power supply needed when using USB channel.
- Alphanumeric panel readout or PC installed software.
- Supplied with operating and data collecting software.
- USB 1.1 compatible.
Specifications
| LVDT Excitation |
|
| Voltage |
1.5 V rms @ 15 mA max |
| Frequency |
1 to 10 kHz, selectable upon request |
| Signal Input |
|
| Input Voltage Range |
±2.5V |
| Sensitivity max |
2.5 μV |
| Impedance |
>100 kΩ |
| Functions |
|
| Zero adjustment |
Using PC based software (supplied), or from panel |
| Scale adjustment |
Using PC based software (supplied), or from panel |
| Resolution |
0.0001% of Full Scale |
| Conversion Rate |
7 or 70 conversions per second, selected from PC |
| Scale units |
Inches or millimeters, user selectable |
| Non Volatile memory |
Flash memory |
| Low Pass Filtering |
Digital filtering > 80 dB, 50 Hz |
| Readout Display |
6 digit (±999,999 counts) |
| Serial Communication Port |
USB and RS-232 |
| Serial Protocol |
Binary Code (3 Bytes) |
| Communication Cable length |
≤ 2m for USB, ≤ 20m for RS-232 |
| Power supply |
+9V DC from adapter when disconnected from USB |
| Operating temperature range |
+5C° to +55C° |
| Dimension (mm) |
125 x 106 x 33 |
| Digital limit output |
Open collector, up to 40V & 50mA |
How To Order
Ordering example: Model Number: USB-10
|
|
|
|
|
400-878-1895
