FEATURES AND BENEFITS
|
| 1 |
Energized and self-lubricated strips |
Less friction between piston and cylinder |
| It prevents the bonding of the seal to the cylinder even after long periods of inactivity |
| 2 |
Slots, bushes and pins made by steel with hardness higher than 50 HRC |
Higher resistance to the forces inside the actuator |
| 3 |
Rolling friction between piston and slot |
Less friction |
| 4 |
Scotch joke with rolling friction (transforming rotary motion into linear motion using piston and shaft without teeths/gears) |
Reduced friction between piston and shaft with consequently less wear on the relevant parts |
| Empowered Break Away Torque (BTO & BTC) |
| Smaller volume/size than rack and pinion actuators (with the same torque) therefore less space required for installation |
| Less weight than the rack and pinion (-30% kg / Nm), with consequent savings on the construction sizing of the plant/equipment |
| Lower air consumption compared to the rack and pinion (-40% air cm3/Nm for Double Acting and -20% air cm3/Nm for Spring Return) therefore less load on the compressor or the possibility of using a smaller compressor's size. |
| 5 |
Rolled cylinder |
Less wear of the energized ties thanks to the low roughness of the surface (0.15 micron Ra) |
| |
100% in- house manufacturing process technology |
Maximum control and accuracy in all the stages of the manufacturing process |
| |
ATEX Certificate |
Installation is allowed in a potential explosive environment |
| |
SIL 3 Certified |
Guarantee of the high level of functional safety. |
400-878-1895
