2340S-100-2K

• Output Voltage: 400 Vp-p (± 200 V)
• Output Current: 40 mA
• Bandwidth: DC to 2 MHz
• Slew Rate: >250 V/µs
• Channels: 1
• x100 gain (10-100 available)
• 2K Input Impedence
• Independent monitor output
• 1 year warranty
• Product Forum

Description

The Model 2340S-100-2K High Voltage Amplifier expands the amplitude range of any standard function, pulse, or waveform generator to 400 Vp-p. Model 2340S-100-2K comes standard with a fixed gain of +100, and gains from 10 to 100 are available as special order. In some cases, the signal source consists of a DAQ card or plug in computer board that is not compatible with 50 Ω impedance. Higher amplifier input impedance around 2 kΩ is normally sufficient to solve this problem.

The output current is rated at 40 mA continuous with a 0.2 Ω output impedance. Each channel has an independent, buffered, voltage monitor output for applications that require a low-level representation of the output signal. The buffers produce a reduction of 200:1 for 50 Ω inputs and 100:1 for 1 MΩ and above inputs. A current limiting function senses the current in either direction providing maximum protection to the amplifier during operation.