2375

• Output Voltage: -7 to +150 V
• Output Current: 20 mA
• Bandwidth: DC to 5 kHz
• Slew Rate: >5 V/µs
• Channels: 4
• Independent monitor output
• Compatible with most waveform generators
• 1 year warranty
• Product Forum

Description

The Model 2375 Four-Channel MEMS Engine Driver Amplifier has two modes of operation: normal (splitter bypass) mode and splitter mode. Each of its four channels is rated for 20 mA continuous current with 0.2 Ω output impedance. The 2375 can drive capacitive loads up to 200 pF while maintaining a full power bandwidth, exceeding 5 kHz. The outputs are short circuit protected. 

Each channel has an independent voltage monitor output for applications that require a low level representation of the output signal in a closed loop system. The buffers produce a reduction of 100:1 of the output voltage for measurement devices with a 1 MΩ or higher input impedance.