This Anybus X-gateway provides connectivity between Ethernet/IP and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appear as an Ethernet/IP slave/adapter allowing an Ethernet/IP master/scanner to read or write data from the J1939 network. 
HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway Ethernet/IP interface.

Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway Ethernet/IP interface. The configuration is downloaded from the PC to the X-gateway via an RS232 connection and is saved in FLASH memory. 

Target Industries:
* Electric Power Generation 
* Oil & Gas 
* Marine 
* Defense 
* Heavy Duty, Construction & Agricultural Vehicles 
* Testing & Validation 
* Any Diesel Engine based system supporting J1939 

	KEY FEATURES
	DIN-rail mountable - PE via DIN-rail
	Wide power supply range (12-30 VDC)
	Configuration via a Windows-based PC software tool (BWConfig)
	Rugged IP20 aluminium enclosure
	Supports FLASH field upgrades
	UL and ATEX certification for Ex Hazardous Locations
	Transmission and reception of all types of J1939 messages, including PDU1, PDU2, broadcast and destination specific.
	J1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes). Both connection based (RTS/CTS) and broadcast (BAM) are supported.
	Ethernet/IP 10/100 Mbit full duplex operation

TECHNICAL SPECIFICATIONS
Size:	126 mm x 110 mm x 42 mm
Power Supply:	12-30 VDC
Temperature:	0-65°C
Current Consump:	Max 300 mA
Baud Rate:	10/100 Mbit autodetect on Ethernet/IP
Mech Rating:	IP20 / Nema 1
Profile Support:	SAE J1939 (CAN)
Config Method:	BW Config (free)
Appl Interface:	CAN and Ethernet (twisted pair)
Ethernet connector:	RJ45
Config connector:	9-pole DSUB
UL certification:	E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification:	ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply connect:	2-pole 5.08 mm Phoenix pluggable screw connector
CAN J1939 connector:	5-pole 5.08 mm Phoenix pluggable screw connector
Price Group:	A
US orders:	Please contact HMS for US model numbers
Order Code:	-AB7665