CAN光纤转换器

关键词: CAN,光纤转换,

简介：光纤转换器FO-转换器从ISO 11898 转换成光纤，Converter from ISO 11898 to fiber optic cableFO转换器用于将CAN的（ISO 11898-2）电缆型号转换成光纤信号。The FO Repeater is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables.其提供了完整的隔离和一级EM过滤。This provides acomplete isolation and protection against ...
品牌
产地
型号	PXF1036
折扣

光纤转换器

Ixxat.com="" portal="">

FO-转换器

从ISO 11898 转换成光纤，Converter from ISO 11898 to fiber optic cable

FO转换器用于将CAN的（ISO 11898-2）电缆型号转换成光纤信号。The FO Repeater is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables.

其提供了完整的隔离和一级EM过滤。This provides a complete isolation and protection against EM-influences.

其特殊的接口One special feature of the Repeater is that it separates a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

Technical Data，技术参数

Display显示	Sending (2 green LEDs), defective segment (2 red LEDs)
CAN bus interface	ISO 11898-2. Screw terminals. CAN termination resistors are integrated (switchable).
FOC connection光纤连接	2 x ST terminals for duplex line (Glass 50/125 µm duplex)
Baudrate波特率	Up to 888 kbps
Delay 延迟	小于300ns在60m的光纤之间通信和转换下。 ~300 ns (translates into ~60 m (~90 ft.) bus length) between the wire connection of a FO Repeater through the fiber optic cable to the wire connection of a second FO Repeater (not including the signal delay time of the fiber optics, which is ~5 ns/m)
Power supply 供电	9-35 V DC, 3 W typ., through terminals
Galvanic isolation 隔离	1 kV, 1 sec.; CAN 1
Certification认证	CE
Temperature range 温度范围	-20 ºC to +60 ºC
Housing, size	Plastic enclosure, 110 x 75 x 22 mm (without FO connector)

Contents of delivery
- FO-Repeater, Quick reference

Order number

1.01.0063.01020

CAN Fiber Optic Repeater - Glass fiber version with ST connector

参数资料: CAN光纤转换器CAN,光纤转换,

价格列表: CAN光纤转换器CAN,光纤转换,

葩星订货号	订货号	产品名称	报价			品牌

相关产品: CAN光纤转换器CAN,光纤转换,

咨询历史: