<Products> Automotive> Gateways> CAN@net II/Generic

Gateways/Bridges

CAN@net II/Generic - CAN Ethernet Gateway or CAN/CAN-Bridge

CAN@net II/Generic - CAN/Ethernet Gateway

CAN-Ethernet Gateway and
CAN-Ethernet-CAN Bridge


WEEE and RoHS conformCAN-Ethernet Gateway
In the gateway mode the CAN@net II/Generic is connected to a PC or to a controller platform via TCP/IP. The application program on the host communicates via a standard TCP/IP socket and uses a simple ASCII protocol. As CAN-Ethernet Gateway, the CAN@net II/Generic offers simple, flexible access to CAN systems via a LAN or via the Internet.

CAN Gateway Configuration - Overview

CAN-Ethernet-CAN Bridge
Using two CAN@net II/Generic, a CAN-Ethernet-CAN bridge can be implemented. This bridge allows the exchange of CAN messages between two CAN systems via TCP/IP where filter tables can be defined.


CAN Bridge Configuration - Overview

Configuration and firmware update
The configuration of the TCP/IP parameters can be performed using a PC tool with automatic device detection. The configuration of the bridge functionality and the CAN communication is supported by an implemented webserver.

Technical Data

PC bus interface10/100 Mbit/s Ethernet (10Base-T/100Base-T), Autodetect, RJ45 connector
IP address allocationDHCP, via PC tool
MicrocontrollerFreescale MCF5235, 150 MHz
Memory extension8 Mbyte DRAM, 4 Mbyte Flash
CAN controllerSJA1000
CAN bus interfaceISO 11898-2, Sub D9 galvanically decoupled (500V)
Current supply9-32 V DC, 3 W
Temperature range-20 ºC ... +70 ºC
CertificationCE, FCC, CSA
HousingPlastic housing for top hat rail mounting
Sizeapprox. 22,5 x 100 x 115 mm

Contents of delivery
- CAN@net II/Generic
- User manual
- Sample programs

from Stock


Order number
1.01.0086.10201 CAN@net II/Generic; one CAN channel