<Products> Automotive> CAN> Repeater/Bridges> CAN-CR200

Repeater

Modular ISO/IS 11898-2 CAN Repeater

CAN-CR200

Modular ISO 11898-2 CAN Repeater


WEEE and RoHS conformThe CAN-CR200 is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. Several CAN-CR200 can be connected to a CAN-hub via the integrated backbone bus. One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

The galvanic isolation isolates the CAN segments from each other as well as from the power supply.

Technical Data

DisplayTransmit and defective segment (three duo LEDs), Power (one LED)
CAN bus interfaceISO 11898-2 with CAN choke. Two Sub-D9 connectors and one backbone bus. CAN termination resistors are integrated (switchable).
BaudrateUp to 888 kbps
Delay200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply9-32 V DC, 1.5 W typ., through terminals
Galvanic isolation1 kV, 1 sec.; CAN 1, CAN 2 and backbone bus are galvanic isolated against each other.
CertificationCE, FCC
Temperature range -20 ºC ... +70 ºC
Housing, sizePlastic enclosure, 22.5 x 100 x 115 mm

Contents of delivery
- CAN-CR200, Quick reference

from Stock

Accessories
- T bus connector for creating star / tree topologies

Order number
1.01.0067.44010 CAN-CR200
1.04.0073.00000 T bus connector