简介:The frenzel & berg electronic CO4011 IO boardsprovide all neccessary functions for a CANopen-device. The software-implementation of the CANopen-protocol is already done and tested so an additional programming of the device is not needed. The setup for node-number, baudrate and device configuration is done by external resistors. All modules are equipped with a CAN-transceiver therefore no additiona...
The frenzel & berg electronic CO4011 IO boards provide all neccessary functions for a CANOpen-device. The software-implementation of the CANOpen-protocol is already done and tested so an additional programming of the device is not needed. The setup for node-number, baudrate and device configuration is done by external resistors. All modules are equipped with a CAN-transceiver therefore no additional hardware is necessary to 连接 them to the CAN-bus.
system
CPU 16 Bit
supply voltage 5V DC
temperature range -40 .. +105°C
plug-in module 60 pins
measurements 41x31x18 mm
in-/ outputs digital / analog
in-/ outputs 32 max.
filters for digital inputs configurable
inputs digital 5V (max.) 32 of 32
outputs digital 5V (max.) 32 of 32
inputs analog 0 .. +5V (max.) 8 of 32
supported modes:
mode 0: 20 digital IN / 12 digital OUT
mode 1: 12 digital IN / 12 digital OUT / 8 analog IN
mode 2: 16 digital IN / 12 digital OUT / 4 analog IN
mode 3: reserved
mode 4: 12 digital IN / 20 digital OUT
mode 5: 4 digital IN / 20 digital OUT / 8 analog IN
mode 6: 8 digital IN / 20 digital OUT / 4 analog IN