简介：The Kvaser LAPcan 产品描述：EAN Number: 73-30130-00029-2The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are...
The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.
The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.
主要特点
Quick and easy plug-and-play installation
The CAN drivers (DRVcans) are ex改变able; see below
Physical layer depends on the DRVcan type
Ultrasonically welded card frame
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
The on-board firmware will auto-detect the type of DRVcan
Driver support for major operating systems
PC card (PCMCIA) type II, on-board C161 16-bit microcontroller
Large on-board RAM buffer for CAN messages
Supports "listen-only" mode for analyzing tools
特点
值
The information herein is subject to 改变 without notice.
Galvanic Isolation
No
Bitrate
5-1000 kbit/s
Silent mode
Yes
Error frame generation
Yes
Error frame detection
Yes
Weight
50 g
Timestamp resolution
8
On board buffer
Yes
Maximum message rate, send
0
Maximum message rate, receive
0
Sound
No
Clock synchronization
N/A
Dimensions (WxLxH)
85x54x5 mm (3.3x2.1x0.2in.)
驱动
Kvaser Drivers for Windows Kvaser_drivers_setup.exe (Version V4.9.0) Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus. Release Notes
Kvaser DIADEM driver Kvaserdiadem.zip (Version 1.0.0) This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.
Documentation
Kvaser LAPcan / LAPcan II Users Guide
UG_98042_lapcan_userguide.pdf (Version V3.1.0) Kvaser LAPcan / LAPcan II Hardware Guide
Development Kits and Tools
Kvaser CANKing Kvaser_canking_setup.exe (Version V5.3.889) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
XTM, Free LIN Viewer
xtmlin.zip (Version V3.8sr5) A free of charge LIN bus viewer. Works with Kvaser Leaf Professional LIN, and/or Kvaser LAPcan + DRVLIN.
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
Kvaser CANlib SDK
canlib.exe (Version V4.9) Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to downl Release Notes
Kvaser LabView VI Library for CAN
kvCanVi.zip (Version V6.1.0) Library for National Instrument's LabView version for all Kvaser CAN hardware.
Kvaser LabView VI Library for LIN
kvlinvi.zip (Version 1.0.0) Library for National Instrument's LabView for all Kvaser LIN hardware.
cleanup.exe
cleanup.EXE (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.
Kvaser CANKing Kvaser_canking_setup.exe (Version V5.3.889) A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work. Release Notes
Remove old drivers
cleanup_vector.exe (Version V3.9c) Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you
收藏灵猫网
12522120
12522120
+86-14782588945
