J1939 - Modbus RTU 从站

关键词: J1939 - modbus RTU Slave J1939modbus

简介：J1939 - Modbus RTU Slave The Anybus X-gateway J1939 网关 provides 连接ivity between a Modbus RTU (serial) network and a J1939 Heavy Duty vehicle (CAN) network. The ABX appears as a Modbus Slave device allowing a Modbus Master to read or write data from the J1939 network.HMS provides the ABX with a Windows based configuration tool (BWConfig). This PC based software allows the user to map J...
品牌	HMS
产地	瑞典
型号	PXF2501
折扣	其他电询

咨询专家:

	黄工-工业总线-工业自动化-实时仿真 ID：2937
	机电电子工程专业硕士，机械设计制造及其自动化/计算机双学士，高级工程师具有丰富的从业、管理经验，曾在机电工程公司，资深设计代理公司工作。历任组织、经理等岗位，同时具有深厚的理论基础和项目项目研发经历。...
	[MORE]

	赵工-总线系统-嵌入式系统-工业自动化 ID：2940
	机械电子工程，嵌入式系统专家，高级工程师嵌入式项目开发，ARM，Freescale，Infilion等系列单片机系统开发，DSP嵌入式系统开发，FPGA系统开发，项目经验丰富。 ...
	[MORE]

产品说明:

j1939 - modbus RTU Slave

The anybus X-gateway j1939 网关 provides 连接ivity between a modbus RTU (serial) network and a J1939 Heavy Duty vehicle (CAN) network. The ABX appears as a modbus Slave device allowing a Modbus Master to read or write data from the J1939 network.
HMS provides the ABX with a Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the ABX modbus RTU interface.

Configuration of the ABX is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the ABX modbus RTU interface. The configuration is downloaded from the PC to the ABX via an RS232 连接ion and is saved in FLASH memory.

	KEY FEATURES

	DIN-rail mountable - PE via DIN-rail
	Configuration via a Windows-based PC software tool (BWConfig)
	Wide power supply range (12-30 VDC)
	Rugged IP20 aluminium enclosure
	Designed for harsh industrial applications
	Supports FLASH field upgrades
	UL and ATEX certification for Ex Hazardous Locations
	Transmission and reception of all types of j1939 messages, including PDU1, PDU2, broadcast and destination specific.
	j1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes). Both 连接ion based (RTS/CTS) and broadcast (BAM) are supported.
	Support of all commonly used modbus functions for reading and writing I/O data and diagnostics.
	Overall module, modbus, and j1939 status and diagnostics accessible through Modbus diagnostic functions and addressable registers.

TECHNICAL SPECIFICATIONS
Size:	126 mm x 110 mm x 42 mm

Power Supply:	12-30 VDC

温度:	0-65°C

Current Consump:	Max 300 mA

Baud Rate:	4800, 9600, and 19200 bps on modbusRTU

Mech Rating:	IP20 / Nema 1

Profile Support:	SAE j1939 (CAN)

Config Method:	BW Config

Appl Interface:	CAN and RS485

Price category:	A

US orders:	Contact HMS for US model numbers

订货号:	AB7612

anybusj1939modbus