LonWorks到CCLink从站网关网桥

The anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.

The CC-Link interface is a slave module for the CC-Link fieldbus system. It contains all the functionality needed to turn an application into a complete CC-Link remote device and it is configured to use the generic PLC profile. The CC-Link interface module is certified by the CLPA organisation and has proven conformance and interoperability with leading PLC´s, HMI´s etc 

The LonWorks interface is a high performance interface to LonWorks networks. The interface supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the "LWtool" PC-based configuration utility program, link, and convert data between the 其他 network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVT""s or UNVT?s. 

	KEY FEATURES
	Uses up to 4 occupied stations on CC-Link - configurable size
	Uses the CC-Link PLC profile for data ex改变
	Certification prepared for Lonmark application layer interoperability guidelines V3.2
	LonWorks FT-X1 Transceiver
	Support for CC-Link version 2.0 with extended data
	Includes special LW Config Software Tool for Network variable Setup

TECHNICAL SPECIFICATIONS
Size:	126 mm x 110 mm x 42 mm
Power Supply:	24 VDC (±10%)
温度:	0-65°C
Current Consump:	max 300 mA
I/O Input:	Default 20 bytes, CC-Link V.2: max. 368 bytes (896 I/O-points & 128 words) V.1: max 48 bytes (128, 16 ), max 32 network varibles on LonWorks
I/O Output:	Default 20 bytes, CC-Link V.2: max. 368 bytes (896 I/O-points & 128 words) V.1: max 48 bytes (128, 16 ), max 32 network varibles on LonWorks
Mech Rating:	IP20/Nema1
Config Method:	Windows Hyper Terminal
UL certification:	E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification:	ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply 连接or:	2-pole 5.08 mm Phoenix pluggable screw 连接or
CC-Link baudrate:	156kbps to 10Mbps
CC-Link address:	Station 1-64
CC-Link 连接or:	5-pole 5.08 mm Phoenix pluggable screw 连接or
CC-Link config.:	Configured by CC Link Master via CSP Config file (provided by HMS)
LonWorks baudrate:	78 kbit/s
LonWorks Connector:	5-pole 5.08 mm Phoenix pluggable screw 连接or
LonWorks Config:	LW Tool ABX for LonWorks interface variable configuration (included).
Price Group:	C
订货号:	AB7627