简介：CANopen REPEATER/ISOLATOR The ranges includes various products for solving all the needs of a CANopen line like extension of the line, 增加of 节点 number, 隔离of CANopen branches, 保护from spikes noise and electrostatic charger or simply to 改变 the通信波特率. The xGate-HD67117 and xGate-HD67117M devices ...
The ranges includes various products for solving all the needs of a CANOpen line like extension of the line, 增加
of 节点 number, 隔离of CANOpen branches, 保护from spikes noise and electrostatic charger or simply to 改变 the通信波特率.
The xgate-HD67117 and xGate-HD67117M devices are 中继器/isolators for CANOpen buses.
The xgate-HD67117R, xGate-HD67117-A3 and xGate-HD67117-A4 devices are 中继器/isolators with a 3kV 隔离between the two CANOpen bus.
The xgate-HD67402 serie are rugged devices that can be located on cars, trucks, trains, boats and any 其他 machines that needs to isolate/repeat a portion of CANOpen bus network.
With his particular metal enclosure, equipped with four fixing lugs, makes available the mounting of the device in any plane surface (horizontal, vertical, oblique).
It is possible to have the devices varnished or totally resined and also in both cases with Mini-Fit 连接器 or AMP SuperSeal 1.5 连接器.
If is resined, the enclosure, like the AMP SuperSeal 1.5 连接器 is waterproof. Otherwise, if is not resined, the 连接器 are always waterproof, but the enclosure is IP65.
The xgate-HD67117F and xGate-HD67117FSX are converters from CANOpen to Fiber Optic.
The FSX version allows to get the maximum distance of 2000m, also using a baudrate of 1Mbps.
canopen/Optic Fibres - 中继器- Extender bus line
( High Performance )
-40° to +85°
As a repeater, strictly said, that transfer the signal from one device to an其他 without any processing of the signal itself: the use of a repeater is appropriate when the lines are electrical noise or transfer distances are high and you must use a extensor line, for very large distances, it is advisable to use the Fibres optic devices that have coverage up to 2 km.
As isolator, the device can be inserted in two lines of the same protocol for passing data, but in a way that they still remain galvanically isolated.
As bridge: if the signal to be transferred needs to be 改变d in speed (baudrate) in this case, the repeater device can also be used as a bridge.
Otherwise if you want to manipulate the signal further (CobId, filter, etc..) Is useful to use our device to canopen or CAN Bridge:
收藏灵猫网
12522120
12522120
+86-14782588945
See Bridge canopen 
canopen data filtrate
xgate-HD67402
Series canopen Repeater
