Kvaser_LAPcan

关键词: Kvaser,LAPcan

简介：The Kvaser LAPcan 产品描述：EAN Number: 73-30130-00029-2The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are...
品牌	kvaser
产地	瑞典
型号	PXF1043
折扣	6个以上折扣12% 10个以上折扣15% 26个以上折扣18% 50个以上折扣30% 100个以上折扣40% 其他电询

咨询专家:

	黄工-工业总线-工业自动化-实时仿真 ID：2937
	机电电子工程专业硕士，机械设计制造及其自动化/计算机双学士，高级工程师具有丰富的从业、管理经验，曾在机电工程公司，资深设计代理公司工作。历任组织、经理等岗位，同时具有深厚的理论基础和项目项目研发经历。...
	[MORE]

	赵工-总线系统-嵌入式系统-工业自动化 ID：2940
	机械电子工程，嵌入式系统专家，高级工程师嵌入式项目开发，ARM，Freescale，Infilion等系列单片机系统开发，DSP嵌入式系统开发，FPGA系统开发，项目经验丰富。 ...
	[MORE]

产品说明:

The Kvaser LAPcan

产品描述：

The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.

主要特点

Quick and easy plug-and-play installation
The CAN drivers (DRVcans) are ex改变able; see below
Physical layer depends on the DRVcan type
Ultrasonically welded card frame
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
The on-board firmware will auto-detect the type of DRVcan
Driver support for major operating systems
PC card (PCMCIA) type II, on-board C161 16-bit microcontroller
Large on-board RAM buffer for CAN messages
Supports "listen-only" mode for analyzing tools

特点	值
The information herein is subject to 改变 without notice.
Galvanic Isolation	No
Bitrate	5-1000 kbit/s
Silent mode	Yes
Error frame generation	Yes
Error frame detection	Yes
Weight	50 g
Timestamp resolution	8
On board buffer	Yes
Maximum message rate, send	0
Maximum message rate, receive	0
Sound	No
Clock synchronization	N/A
Dimensions (WxLxH)	85x54x5 mm (3.3x2.1x0.2in.)

驱动

Kvaser Drivers for Windows
kvaser_drivers_setup.exe (Version V4.9.0)
Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus.
Release Notes

Kvaser DIADEM driver
kvaserdiadem.zip (Version 1.0.0)
This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser.

Documentation

Kvaser LAPcan / LAPcan II Users Guide
UG_98042_lapcan_userguide.pdf (Version V3.1.0)
Kvaser LAPcan / LAPcan II Hardware Guide

Development Kits and Tools

Kvaser CANKing
kvaser_canking_setup.exe (Version V5.3.889)
A free of charge, general-purpose CAN bus monitor. Works with all CAN interfaces from Kvaser. Windows 2000 or later is recommended but Windows 98 should also work.
Release Notes

XTM, Free LIN Viewer
xtmlin.zip (Version V3.8sr5)
A free of charge LIN bus viewer. Works with Kvaser Leaf Professional LIN, and/or Kvaser LAPcan + DRVLIN.

cleanup.exe
cleanup.EXE (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer.

Remove old drivers
cleanup_vector.exe (Version V3.9c)
Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from you

Kvaser CANlib SDK
canlib.exe (Version V4.9)
Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to downl
Release Notes

Kvaser LabView VI Library for CAN
kvCanVi.zip (Version V6.1.0)
Library for National Instrument's LabView version for all Kvaser CAN hardware.

Kvaser LabView VI Library for LIN
kvlinvi.zip (Version 1.0.0)
Library for National Instrument's LabView for all Kvaser LIN hardware.

Kvaser Software