CCLink版本-Anybus

关键词: CCLink版本,Anybus

简介：CC-Link Plug-In Module The Anybus-CompactCom CC-Link is a CC-Link slave module, providing instant CC-Link 连接ivity via the uniform Anybus-CompactCom host interface.Since the Anybus-CompactCom software interface is designed to be protocol independent, no additional driver code needs to be written in order to use the module; ADIs and Process Data can be accessed from the network, and importa...
品牌
产地
型号	PXF1996
折扣

咨询专家:

产品说明:

CC-Link Plug-In Module

The Anybus-CompactCom CC-Link is a CC-Link slave module, providing instant CC-Link 连接ivity via the uniform Anybus-CompactCom host interface.
Since the Anybus-CompactCom software interface is designed to be protocol independent, no additional driver code needs to be written in order to use the module; ADIs and Process Data can be accessed from the network, and important host application events can be reported to the network in a standardized way using the Diagnostic Object.
The module can be initialized with any of the supported profiles of a Remote Device Unit. The module works with the PLC profile as default. When used in standard mode the module support CC-Link version 1, but can during initialisation be configured for CC-Link version 2 functionality.

	KEY FEATURES

	Supports all profiles for a Remote Device (default PLC profile)
	Total 128 I/O points (bit) and 16 Words IN/OUT data (CC-Link ver 1)
	No of occupied stations: 1-4
	Selectable baud rates from 156kbit/S to 10 Mbit/s
	Optically isolated CC-Link interface
	Complete CC-Link functionality & Conformance according to BTP-050227-B specification
	Support for CC-Link version 2.0 with extended data

TECHNICAL SPECIFICATIONS
Size:	52 mm x 50 mm x 22 mm

Power Supply:	3,3 Volt

温度:	-40 to +70°C

Baud Rate:	156kbit/s to 10Mbit/s

Config Method:	Application interface (switch 1&2)

Appl Interface:	Parallel and serial

订货号:	AB6311 (Without Housing)

订货号:	AB6211