|
|
|
|
IWATSU PHV641_661-LR0 |
|
|
简介：High-voltage Probes HV-P60/HV-P30TOPHigh-voltage Probes Model Bandwidth (MHz) Attenuation ratio 1: x Withstand voltage (duty 10%) Withstand voltage (duty 50%) DC Length (m) Remarks PHV1000-RO 400 100 6kV (500ms cycle) 3.5kV (100ms cycle) 1kV 2 CAT 1 PHVS1000-RO 400 ... |
|
Brand
|
|
|
| Made In |
|
| Modle |
PXF2322
|
| Disctount |
|
|
| PassionTech Ord |
OrderNum |
Product Name |
Price RMB |
Brand |
|
|
|
High-voltage Probes HV-P60/HV-P30TOP
High-voltage Probes
| Model |
Bandwidth
(MHz) |
Attenuation
ratio 1: x |
Withstand voltage
(duty 10%) |
Withstand voltage
(duty 50%) |
DC |
Length (m) |
Remarks |
| PHV1000-RO |
400 |
100 |
6kV (500ms cycle) |
3.5kV (100ms cycle) |
1kV |
2 |
CAT 1 |
| PHVS1000-RO |
400 |
1000 |
6kV (500ms cycle) |
3.5kV (100ms cycle) |
1kV |
2 |
CAT 1 |
| PHV641-LRO |
380 |
100 |
4kV (200ms cycle) |
3.5kV (60ms cycle) |
3kV (+AC peak) |
1.2 |
AC rms 2kV |
| PHV661-LRO |
380 |
100 |
6kV (200ms cycle) |
5kV (60ms cycle) |
4kV (+AC peak) |
1.2 |
AC rms 2.8kV |
| PHV4002-3/0,6RO |
100 |
1000 |
40kV (100ms cycle) |
30kV (30ms cycle) |
20kV (+AC peak) |
3 |
AC rms 14kV |
PHV1000-RO 
PHV6xx-LRO HV-P60
 HV-P60 |
| Specifications |
| Maximum input voltage |
DC 60 kV or AC peak*
Single-shot pulse of 80 kV, standard pulse wave |
| Bandwidth |
DC to 50 MHz, within -3 dB |
| Rise time |
7 ns or less (for probes only) |
| Input RC |
1000 MW ±5% //5 pF ±2 pF |
| Attenuation |
2000:1 ±5% |
| Cable length |
Approx. 4 m |
| Connector |
BNC type |
| Used for |
Oscilloscope with input RC: 1 MW, 15 to 50 pF |
| Size |
Approx. 88 mm (ø) x 338 mm (L) |
| Weight |
Approx. 3.5 kg (including accessories) |
| Accessories |
Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag |
| Options |
High-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30). |
|
* The P-P voltage drops if the CW is 100 kHz or greater.
|
|
| This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1. |
| Characteristic curve |
![Maximum Input Voltage and Frequency (Sine Wave) [HV-P60]](http://www.iti.iwatsu.co.jp/en/products/accessories/images/hv-p60_graph_e.gif) |
|
Maximum Input Voltage and Frequency (Sine Wave) [HV-P60]
|
HV-P30
HV-P30
High-voltage probe stand SK-301 (sold separately) |
| Specifications |
| Maximum input voltage |
DC 30 kV or DC + AC peak*
Single-shot pulse of 40 kV, repetitive signal |
| Bandwidth |
DC to 50 MHz, within -3dB |
| Rise time |
7 ns or less (for probes only) |
| Input RC |
100 MW ±5% //7 pF or less |
| Attenuation |
1000:1 ±5% |
| Cable length |
Approx. 3 m |
| Connector |
BNC type |
| Used for |
Oscilloscope with input RC: 1 MW, 15 to 50 pF |
| Size |
Approx. 66 mm (ø) x 315 mm (L) |
| Weight |
Approx. 3 kg (including accessories) |
| Accessories |
Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag |
| Options |
High-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30). |
|
* The P-P voltage drops if the CW is 100 kHz or greater.
|
|
| This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 30 kV, and the attenuation is 1000:1. |
| Characteristic curve |
![Maximum Input Voltage and Frequency (Sine Wave) [HV-P30]](http://www.iti.iwatsu.co.jp/en/products/accessories/images/hv-p30_graph_e.gif) |
|
Maximum Input Voltage and Frequency (Sine Wave) [HV-P30]
|
|
|
|
|
|
400-878-1895
