<Products> Industrial> CAN> Repeater> CAN Repeater

Repeater

ISO/IS 11898-2 CAN Repeater (with Low-Speed Option)

CAN-Repeater

ISO 11898-2 CAN Repeater (with Low-Speed Option)


WEEE and RoHS conformThe CAN Repeater is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. One special feature of the Repeater is that it separates a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.

Alternative, the Repeater can be equipped with a low-speed bus interface (ISO 11898-3), allowing the operation as high/low-speed converter. Its galvanic isolation isolates both CAN segments from each other as well as from the power supply.

Technical Data

DisplayTransmit (2 green LEDs), defective segment (2 red LEDs)
CAN bus interfaceISO 11898-2 with CAN choke. Screw terminals. CAN termination resistors are integrated (switchable).
BaudrateUp to 888 kbps
Delay200 ns (corresponds ~40 m (~120ft.) bus length)
Power supply9-35 V DC, 1.5 W typ., through terminals
Galvanic isolation1 kV, 1 sec.; CAN 1, CAN 2 and power supply are galvanic isolated against each other.
CertificationCE
Temperature range -20 ºC ... +70 ºC
Housing, sizePlastic enclosure, 110 x 75 x 22 mm

Contents of delivery
- CAN-Repeater, Quick reference

from Stock

Order number
1.01.0064.44000 CAN-Repeater (2 x ISO 11898-2) with galvanic isolation
1.01.0064.46000 CAN-Repeater (ISO 11898-2 to ISO 11898-3) with galvanic isolation