<Products> Industrial> CAN> Interfaces> iPC-I XC16/PMC

Interfaces

Active CAN interface board for CAN, CANopen and DeviceNet

iPC-I XC16/PMC

Intelligent board for 5 V and 3.3 V PMC bus systems with high/low-speed CAN interface and LIN interface


WEEE and RoHS conformCovering a wide range of industrial and automotive CAN applications, this is a powerful and economic solution for an active CAN board with one or two CAN channels. The interface is state-of-the-art, supports PMC and can be easily installed by Plug & Play. Some of the features offered by the on-board microcontroller include filtering, pre-processing, transmission and time-stamped storage of the CAN messages.
Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data even in systems with a high bus load. In combination with the VCI CAN driver, the iPC-I XC16/PMC allows the seamless integration of PC-supported CAN applications.

Technical Data

PC bus interfacePMC Bus (V2.2), 32 Bit / 33 MHz, 5 Volt or 3.3 Volt
Memory rangePlug & Play, 16 kB memory mapped and 128 bytes I/O area
InterruptsINT A, Plug & Play
MicrocontrollerInfineon XC161
CAN controllerTwinCAN (two CAN channels); CAN 2.0 A/B
CAN bus interfaceISO 11898-2 and ISO 11898-3, Sub D9 connector according to CiA 303-1, high-/low-speed bus interface switchable via software
LIN controllerTJA1020
LIN bus interfaceISO 9141/LIN, Master/Slave mode switchable via software, galvanic isolation
Power supply5 V DC, 100 mA typ.; 3.3 V DC, 120 mA typ.
Galvanic isolation1 kV, 1 sec.
Temperature range-20 ºC ... +70 ºC
CertificationCE, FCC
SizeApprox. 74 x 149 mm single CMC

Contents of delivery
- PC/CAN interface card and manual
- CAN driver VCI for Windows 2000, XP, Vista, Windows 7
- Simple CAN monitor "miniMon"

from Stock

Order number
1.01.0049.33660 iPC-I XC16/PMC; two CAN channels with high/low speed bus interface and galvanic isolation; one LIN channel with galvanic isolation