<Products> Industrial> CAN> Interfaces> iPC-I XC16/PCIe

Interfaces

Active CAN interface board for CAN, CANopen and DeviceNet

iPC-I XC16/PCIe

Intelligent CAN interface for PCI express bus systems


WEEE and RoHS conformThis is a powerful and economic solution for an active CAN board with two CAN channels. Some of the features offered by the on-board microcontroller include filtering, pre-processing, transmission and time-stamped storage of the CAN messages.
Due to the powerful microcontroller, both CAN controllers can operate simultaneously without losing any data even in systems with a high bus load. In combination with the VCI CAN driver, the iPC-I XC16/PCIe allows the seamless integration of PC-supported CAN applications. In addition, the iPC-I XC16/PCIe is well-suited for use with the IXXAT analysis and configuration tools, and, for use as a CANopen network controller.

Technical Data

PC bus interfacePCIe (r1.0a), x1 link (2,5 Gbps per direction)
PC address rangePlug & Play, 16 kB memory mapped and 128 bytes I/O area
InterruptsINT A, Plug & Play
MicrocontrollerInfineon XC161
CAN controllerTwinCAN (two CAN channels); CAN 2.0 A/B
CAN bus interfaceISO 11898-2 according to CiA 303-1, Sub D9 connector, optional high-/low-speed bus interface (ISO 11898-3) switchable via software
Power supply12 V DC, 60 mA typ.; 3.3 V DC, 200 mA typ.
Galvanic isolation1 kV, 1 sec.
Temperature range0 ºC ... +70 ºC
CertificationCE, FCC
SizeApprox. 90 x 150 mm

Order options
- LIN interface on request
- CAN high/low speed bus interface on request 

Contents of delivery
- PC/CAN interface card and manual
- CAN driver VCI for Windows 2000, XP, Vista, Windows 7
- Simple CAN monitor "miniMon"

from Stock

Order number
1.01.0053.33220 iPC-I XC16/PCIe; two CAN channels with galvanic isolation