简介：FIP Slave - CANopen Slave The Anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.The FIPIO interface i...
The anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.
The FIPIO interface is based an embedded AnyBus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer 连接ion on the module provides a isolated fieldbus interface.
The canopen interface is an adapter class product allowing fast data ex改变. The CANOpen slave?s data map consists of Process Data Objects (fast data) and Service Data Objects (slow data). The data on the CANOpen bus is updated when a 改变 is made or on request from an其他 node. The CANOpen interface module is certified by the Can In Automation organisation and has proven conformance and interoperability with leading PLC´s, SoftPLC´s, HMI´s etc
KEY FEATURES
Supports both FIP and WorldFIP standards
FIPIO profile FEDP (Extended Device Profile), class 0
Transformer isolated FIP interface
canopen PDO and SDO data objects supported
canopen Unscheduled data ex改变 support
canopen profile DS-301 v.4.02
Customizable PDO-mapping
Network Stor/Restore functionality
Heatbeat and node guarding support
TECHNICAL SPECIFICATIONS
Size:
126 mm x 110 mm x 42 mm
Power Supply:
24 VDC (±10%)
温度:
0-65°C
Current Consump:
max 300 mA
I/O Input:
Default 20 bytes, max 64 bytes
I/O Output:
Default 20 bytes, max 64 bytes
Mech Rating:
IP20/Nema1
Config Method:
Windows Hyper Terminal
UL certification:
E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification:
ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply 连接or:
2-pole 5.08 mm Phoenix pluggable screw 连接or
FIPIO baudrate:
1 Mbit/s
FIPIO address:
Node address 0-99
FIPIO 连接or:
D-sub 9-pin male
canopen baudrate:
10 kbit/s to 1 Mbit/s
canopen 连接or:
D-sub 9-pin male
canopen address:
Node address 1-99
canopen config.:
Configured by CANOpen Master via EDS file (provided by HMS)
收藏灵猫网
12522120
12522120
+86-14782588945
FIP Slave - canopen Slave
The anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.
