简介：Profibus Slave - FIP Slave The Anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.The Profibus DP/DPV1...
The anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.
The profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.
The FIPIO interface is based an embedded AnyBus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer 连接ion on the module provides a isolated fieldbus interface.
KEY FEATURES
Watchdog support
Sync and Freeze
Supports PA baud rate 45.45 kbit/s
Supports both FIP and WorldFIP standards
FIPIO profile FEDP (Extended Device Profile), class 0
Transformer isolated FIP interface
Complete profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158
TECHNICAL SPECIFICATIONS
Size:
126 mm x 110 mm x 42 mm
Power Supply:
24 VDC (±10%)
温度:
0-65°C
Current Consump:
max 300 mA
I/O Input:
Default 20 bytes, max 64 bytes
I/O Output:
Default 20 bytes, max 64 bytes
Mech Rating:
IP20/Nema1
Config Method:
Windows Hyper Terminal
UL certification:
E203225, Listed 67AM, UL-1604 Class 1, Div 2, GP A, B, C, D, Temp Code T4
ATEX certification:
ATEX 135419, II 3 G, EEx nL IIC T4, DEMKO 03
Power supply 连接or:
2-pole 5.08 mm Phoenix pluggable screw 连接or
profibus baudrate:
9600 bit/s - 12 Mbit/s autodetect
profibus address:
Node address 0-99
profibus 连接or:
D-sub 9-pin female
profibus config.:
Configured by Profibus Master via GSD file (provided by HMS)
收藏灵猫网
12522120
12522120
+86-14782588945
profibus Slave - FIP Slave
The anybus X-gateway copies I/O-data in both directions thus enabling data ex改变 between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.
