Interbus Fiber Optic Slave Interface The New anybus-S 2MBit/s interface with a Fiber Optic bus-interface for Interbus is an important complement to the standard module for copper based cabling. The Fiber Optic module is based on the OPC chipset from Pheonix, which gives support for optical diagnostics.
This means the AnyBus-S unit has a high EMC immunity and also a very low EMC emission. The fibre optic module is fully compatible to the rest of the AnyBus-S family in its data ex改变 and 其他 properties.
KEY FEATURES
Same features supported as in anybus-S Embedded Interbus Slave Plus additional Fibre Optic features FSMA standard 连接器 conforming to IEC874-2 and DIN47258
Based on OPC chipset with support for optical diagnostics
Full inter改变ability with anybus-S modules for 其他 networks
CE, UL & cUL Tested
Support for OPC diagnostic functions
TECHNICAL SPECIFICATIONS
Size:
54 mm x 86 mm x 15 mm
Power Supply:
+5V max 300mA
温度:
0-70°C
Baud Rate:
Selectable 500 kbit/s or 2Mbit/s
I/O Input:
Max 20 byte Process data
I/O Output:
Max 20 byte Process data
Appl Interface:
Parallel
Parameter data:
PCP V.2.0 ( selectable between 0,1,2,or 4 words )
Interbus Features:
Possibility to define up to 256 own PCP-objects + own VFD-object. Supports PMS-services: Supports PCP v 2.0: Initiate, Abort, Reject, Status, Identify Get-OD (long), Read, Write
收藏灵猫网
12522120
12522120
+86-14782588945
The New anybus-S 2MBit/s interface with a Fiber Optic bus-interface for Interbus is an important complement to the standard module for copper based cabling. The Fiber Optic module is based on the OPC chipset from Pheonix, which gives support for optical diagnostics.
